- My name is Befekadu Mengesha
I'm an on application engineer
at Keysight Technologies.
In this video,
I am going to demonstrate a proof of concept for this part
of the project.
With this graphical user interface
ON ELSU ELAS.
With an IP address of 10 40 88 70
as a TX.
Therefore we set the mode as a TX and random access
bandwidth ID to 8
and then miss
the plain text message to be sniffed by the receiver.
UE is saved to "Welcome to the DEF CON".
Similarly,
we have said
the UE
be on
ELSU B
with an IP address of
10
14
88
1 5 7
of the RX.
Therefore we set the mode to RX
and the random access preamble ID to eight.
On the Creative talk side
the PRT script activated the 5G and standard load cell
with the synchronization signal block
is broadcasted via the XM
platform with the periodicity of 20 millisecond.
If the master information blocks is decoded with success
on both
UE
for the sales
will get sync.
And in service
if the system information block type one is decoded.
Since both UE are
in service
and in sync and idle,
we can connect the GUE
to the
layer three test to manager
and verify if the
CB's
decoded.
Then the set should get in service.
We can run the scenario from the RX side first now,
and from the TX side.
It seems that the transmitted message is
with success on
from the TX side.
And let's verify if the receiver UE side
decoded the message
successfully.
So from the scenario logger
here we have decoded that
the message.
"Welcome to the DEF Conference"
From the TX side,
it can be verified that
the message too
is decoded with the
valid RA.
Also on the RX side,
we can check.
The message too is decoded
with the valued RA
as of
TX
UE
that this is a case where we can also verify
the message through three is decoded.
We have success first from the
TX side.
So here we can confirm that the
UE Continuation Resolution ID
is decoded with success
on the TX side and let's see also on the RX sides.
So the RX side in this history is also decoded with success.
So since we have implemented
a CRC
decoding,
if the method is
decoded, we can
see the message on the RX side too,
but you can see the message is decoded successfully
"Welcome to the DEF CON".